Friday 26 July 2013

New drinking water tests from Martek reduce risk from potentially fatal pathogens

Martek Marine, leading manufacturer of maritime safety equipment, is introducing potable water testing kits to its product range, designed to meet the regulations on drinking water which come into force with the Maritime Labour Convention (MLC) in August 2013. The only standard kit guaranteed to meet all legislation and flag state requirements, Drinksafe has been designed to be the easiest kit on the market, providing effective testing for the presence of harmful bacteria and toxins, corrosion related contaminants and pH/Chlorine levels.



Martek’s Drinksafe is easy to use and requires no calibration, saving unnecessary spending on calibrations and saving crew from complicated and time consuming procedures. Drinksafe does not use glass ampoules or messy sample bags, and is robust enough for use on-board as well as light, waterproof and small enough for simple stowage when not in use.

Multi-language instructional videos explain the testing process, while simple-use diagrams remind exactly how the kit should be used. Drinksafe contains 2000 tests, more than any other on the market and enough to last a whole year for one vessel. This provides a comparative cost per test that is over 50% lower than the closest comparative test kit.

Drinksafe comes in a rugged all-in-one waterproof storage box which protects from damage and keeps components together in labeled, segmented areas.

Guidelines on the provision of drinking water at sea are currently provided by numerous different bodies including the World Health Organisation, the International Labour Organisation and national health organisations and maritime bodies. Though well-intentioned, the current guidelines are largely ineffective because they vary so widely and are therefore difficult to implement and enforce. The introduction of overarching regulation set out in the MLC and by the World Health Organisation (WHO) governing seafarers’ rights is expected to address this. MLC 2006 Standard A3.2 – Food and Catering, paragraph 7 states that “the competent authority shall require that frequent documented inspections be carried out on board ships, by or under the authority of the master, with respect to….supplies of drinking water”.

This is further strengthened by the WHO Guide to Ship Sanitation (2011) & Guidelines for Drinking Water Quality (2008) which lists the following “recommended parameters to be monitored:…E. coli or coliforms; Chlorine residual (daily); Microbial quality - bacterial plate count; pH (daily); Turbidity; Corrosion-related contaminants - iron & copper.”

Factors that can promote the growth of bacteria and toxins in a ship’s water supply include limited flow rate, tank or pipe corrosion, alkalinity or acidity and temperature. Often, these problems occur together, accelerating the growth of bacteria. Unfortunately, the growth of bacteria also worsens these issues, for example, some bacteria produce carbon dioxide, which reacts with the water to increase acidity, resulting in more corrosion.

Bacteria and pathogens that can grow in poorly maintained drinking water include E.coli, Norovirus, Salmonella and Legionella bacteria, which can lead to Legionnaires’ disease, a pneumonia-like illness which can be fatal. The importance of avoiding these bacteria is particularly heightened on a vessel which could be days from the nearest port and for which delays or route changes for medical assistance could cost thousands of dollars.

Drinksafe is used to take one sample directly from the water tank and another at the furthest point from the tank. This allows the main water source to be directly tested for bacteria and toxins, as well as the distribution system through which the water flows for everyday use for drinking, personal hygiene, and food preparation.

Water quality recordings are easy to make using the supplied test log book which can be used for Port State Control or flag state inspections.

Martek’s support services include a 24/7 helpline offering expert guidance and advice on water testing as well as an easy to use online ordering facility with a questionnaire to help determine the buyer’s exact requirements and same day account setup and dispatch from Martek’s global distribution network.

Tuesday 16 July 2013

Martek Marine expands into Russian offshore market

Maritime safety and environmental systems manufacturer Martek Marine has achieved a breakthrough first sale in Russia to national oil & gas explorer Gazflot. In another first, Martek’s calibration gases will be utilised on a pair of jack-up rigs in Yushno Sakhalin rather than on merchant vessels. Gazflot has a fleet of nine vessels including jack-up rigs, icebreakers and research ships. The Russian energy major has also placed orders for six of Martek’s Navgard BNWAS and a record breaking six figure system expansion contract.

The sale follows the crucial Type Approval of Martek’s Navgard by the Russian Register and the appointment of Ian Bennett, an experienced Russian speaking oil and gas industry executive as Martek’s regional sales manager.

Ian Bennett said:

“We’ve already seen a huge take-up in our systems aboard merchant vessels needing to meet the requirements of SOLAS Chapter V Regulation 19, but we’re also now seeing increasing interest from the offshore market. Approved by all the major classification societies, Martek’s Navgard is the easiest, quickest and lowest cost system to install.”


Navgard, which comes with a two-year warranty, uses real-time data logging, providing essential evidence in the event of an incident. Unlike some competitors that use simple key switches, Navgard requires a master password to disable, also noting when the system is switched on and off so that checks can be made to ensure it is being used continuously. When MV Karin Schepers grounded in 2009, the accident report noted that a BNWAS was present but had been switched off by crew. IMO regulations require all ships to fit a BNWAS before July 2015.

Tuesday 9 July 2013

Martek introduces market’s first compact BNWAS for smaller vessels

Martek Marine, UK-headquartered manufacturer of maritime safety systems, has announced the launch of a Lloyd’s Register MED-approved BNWAS designed specifically for smaller bridges to meet the next stage of BNWAS implementation starting in July of this year. BNWAS regulations state that existing cargo vessels between 500-3000GT must be compliant by July 2013 and vessels between 150-500GT by July 2014.

The Navgard Mini offers the same functionality as Martek’s Navgard system in a more compact all-in-one-box unit. Navgard Mini is the only system available which has all IMO-compliant alarms and reset switches in a single enclosure, making it very simple to retrofit on the smaller bridges of tugs, OSVs and lower-capacity passenger vessels – the system simply requires a power supply to deliver full compliance with SOLAS regulation.

Existing systems require a button to be pushed to confirm the crew’s presence on the bridge. IMO legislation dictates that BNWAS systems’ first stage alarm must sound between every three to 12 minutes. If the reset button is not pressed, the second stage will activate after 15 seconds. If the button is still not pushed, the third alarm will sound between every 90 to 180 seconds.

Although effective in theory, there have been several incidents, including the grounding of MV Karin Schepers in 2009, on vessels which have had BNWAS installed but switched off, as crew have simply found it too demanding to continue with other necessary work while being disturbed by such frequent alarms and the requirement to push a button so regularly.
Martek has addressed this issue in several ways. Firstly, with the inclusion of the market’s first passive infrared (PIR) motion sensor. This is built in to the device’s panel and detects movement on the bridge. No alarm sounds as long as movement is detected on the bridge, and crew can work undisturbed. Only when the system detects no movement for a set time, between the IMO’s mandated three and 12 minutes, will the alarms sound. Because the PIR sensor is part of the panel, no extra installation is required and no additional wiring is needed, reducing the cost, installation time and space needed.

The second important feature is the password deactivation, also built in to the panel. Where BNWAS models have traditionally been turned off by a simple key, the Navgard Mini can only be deactivated by password. This increases accountability by giving the vessel’s Master the sole responsibility for the device’s operation. The system, which comes with a two-year warranty, also uses real-time data logging, providing essential evidence in the event of an incident and recording when the system is switched on and off so that checks can be made to ensure it is being used continuously.


Martek has compiled a BNWAS buyer’s guide with key questions and points for consideration with a comparison table, which can be downloaded.